FOR TIMBER, TRUSSES AND HARDWARE

4 Maintenance Tips for Weatherboard Cladding

Weatherboard Cladding Melbourne

Weatherboard Cladding makes a very stylish, atheistically pleasing addition to the exterior of your home. However, weatherboard cladding also has practical purposes too. If used correctly, it can contribute to insulation and also acts as a protection to exposed walls. Regardless of its purposes, it’s important to keep it well maintained and in good health, as it goes with most aspects of your home. There are certain things you can do to ensure its longevity into the future. This article will take a look at a few ways you can care for weatherboard cladding and maintain it into the future.

 

Clean Visible Stains Straight Away

One of the common reasons you’ll need to replace your weatherboard cladding down the line is due to discolouration, which happens to timber naturally over time but can be quite unsightly. Among other things, this can be caused by a build-up of dirt and mildew, so we’d highly recommended washing away stains like this as soon as you notice them. But even if you don’t, cleaning weatherboard cladding with warm soapy water early is a smart move. Sometimes you won’t even notice that the timber is becoming discoloured over time, and a clean and rinse will return it to its vibrant best.

 

Keep an Eye Out for Rust Stains

Rust stains are particularly ugly – you may notice brown-red coloured streaks showing up on the walls, ceiling or cladding that you have around the house. The cause of this is obviously a metal object rusting; it could be a light fixture, a screw or bolt or even a railing. When the rusting object becomes wet, a stain or streak is caused as the water drips down on your cladding or wall. Painting these objects will make it less likely that they will rust, but some can be hidden and not easy to access with a paint brush.

Scrubbing and cleaning won’t remove these stains, but fortunately, there are products such as stain-killers and sealers that you can apply to the stains to permanently cover them up. Often painting over them won’t be enough, as the stains will burn through. But if you go to your local hardware store and ask for a rust stain sealer, they’ll be able to help you out.

 

Keep Trees and Bushes Trimmed Back

 

Protecting weatherboard cladding, weatherboard cladding, timber cladding for sheds, timber cladding

 

Experts warn that foliage that is close to or touching your wood cladding can lead to damage, given that the timber is exposed to more moisture as a result. This moisture can enter the cladding through various cracks and crevices, which can lead to water damage. Make sure there is some space between your home and the trees, bushes and other vegetation around it.

 

Replace if Necessary

Already damaged timber cladding is obviously not something you can easily restore and it will usually need to be replaced. But if you know some smart tips about cleaning timber cladding then you can surely minimise the damage. Damage can usually come from bumps or bruises where something has made contact with the timber and then there’s a little you can do to repair this. Prevention is obviously the best option here, as you should always be careful when mowing lawns or playing sport in the backyard. But if the damage is significant, replacing the affected timber cladding boards – rather than all the cladding – is the best option. Usually, it’s best to chat to a professional carpenter about this.

 

Like all aspects of your home – inside and out – timber and weatherboard cladding does require some maintenance and care if it’s going to last. It’s obviously important that you invest in the highest quality timber to ensure longevity. Finding quality timber cladding and building suppliers are part of the process!

Share Your Thoughts!

You must be logged in to post a comment.

Need a Quote? Request a Call Back Now

http://www.healthordisease.com